Home > Products > Three Phase AC Source System > 15000W Three Phase AC Source System > High power triphase AC source lab test

High power triphase AC source lab test

Basic Info

Model No.: SPS300VAC15000W

Product Description

Product Introduction:

APM has the power source equipment, this triphase Ac Source System can output power 15kVA. It`s frequency is 15Hz~1000Hz, independent AC ,independent DC and mixed AC+DC output mode.Output voltage 150V/300V, Current 46A/23A. If 3 units of single 5kVA AC sources in parallel connection in this rack system , you can achieve 1 phase and higher current 138A/69A.



Application Area:

This series is applicable to multiple sectors such as electric, lighting and aviation sectors and it could be applied to enterprise's production test as well.


Product Features:

● 5.6`` large touch color screen, possess complete functions and easy to operate.

● Support for USB data import/export and screen snap from front panel.

● AC+DC mixed or independent output mode for voltage DC offset simulation.

● Capable of setting voltage and current output restriction, support for constant current output mode.

● Capable of setting output slope of voltage and frequency.

● Capable of setting ON/OFF phase angle.

● With reverse current protection to avoid current flowing backward.

● Built-in power meter, which is capable of measuring 5 electrical parameters per phase, including voltage, current, power, etc.

● Support mA current measurement function.


Basic Functions:

1. Adjustable Phase Angle/Slope

Adjustable Phase Angle/Slope is applicable to verification test of ON/OFF inrush current testing. This function is applicable to start inductive or capacitive load with large capacity to avoid high current when instantaneously start the device.

2.High Output Current Crest Factor

The surge current could reach 5-6 times of the rated current, especially suitable for inrush current testing.
3. Output Simulation Sequence and Disturbance Simulation

Capable of simulating power line disturbance simulation test.


Advanced Functions:

1.Built-in IEC Standard Test
Built-in IEC standard test could be recalled directly.

2.3-Phase Operation and Parallel Mode

Support 3-phase operation, 3 units in parallel



Technical Specification:

MODEL SPS300VAC15000W
INPUT
1 Voltage 190~265VAC
2 Frequency 47~63Hz
3 Phase 3 Phase,4Wire+Groud/Y Connect
4 Max.Current 90A
5 Power Factor
@220Vac Input ,Full Load
0.99 Min. Active PFC
6 Effieciency >87% Max
>86% @220Vac,50HZ input/230Vac,50HZ output
3-Phase Output Mode
7 AC Power(Per Phase) 5000VA
8 AC Power(Total) 15000VA
9 Max.Current
(r.m.s)
0~150V(L) 46A
0~300V(H) 23A
10 Max.Current
(Peak)
0~150V(L) 184A
0~300V(H) 92A
Parallel Phase Mode
11 Max.Current
(r.m.s)
0~150V(L) 138A
0~300V(H) 69A
12 Max.Current
(Peak)
0~150V(L) 552A
0~300V(H) 276A
13 Phase 1 Phase
OUTNPUT
14 Total Harmonic Distortion(THD) <0.5% (Resistive Load) at 15.0 - 70.0Hz and output voltage within the 80 - 140Vac at Low Range or the 160 - 280Vac at High Range
<1% (Resistive Load) at 70.1 - 500Hz and output voltage within the 80 - 140Vac at Low Range or the 160 - 280Vac at High Range
<1% (Resistive Load) at 501 - 1000Hz and output voltage within the 100 - 140Vac at Low Range or the 160 - 280Vac at High Range
15 Crest Factor(CF) ≤4
16 Load Regulation +/-0.2%FS @15-100HZ(Resistive Load)
+/-0.5%FS @ Others Freq.(Resistive Load)
17 Line Regulation ±0.1V
18 Voltage(AC)
(L-N)
Range 0~300VAC, 150V/300V/Auto Mode
Resclution 0.1V
Accuracy 0.2% of setting +0.4%F.S at Voltage>3V
19 Phase Angle
(Starting/Ending)
Range 0~359.9°
Resclution 0.1°
Accuracy ±1° @45~65Hz
20 Voltage(DC) Range 0~424VDC
Resclution 0.1V
Accuracy 0.2% of setting +0.4%F.S at Voltage>3V

DC Power
(Per Phase)

5000W
Max.Current
(L/H Range)
(Per Phase)
L 32.6A
H 16.3A
DC Power(Total) 15000W
Max.Current
(L/H Range) (Total)
L 97.8A
H 48.9A
Ripple&Noise(r.m.s)

L <700mVrms @Bandwidth 20HZ to 1MHZ
H <1100mVrms @Bandwidth 20HZ to 1MHZ

Ripple&Noise(Peak) <4000mVp-p @Bandwidth 20HZ to 1MHZ
21 Current OC Fold Mode Resclution 0.1A
Accuracy 2.0% of setting +1.0%F.S.
Response Time <1400ms
22 Frequency Range 15~1000Hz
Resclution 0.1Hz(15.0~99.9Hz) ,1Hz(100~1000Hz)
Accuracy 0.03% of setting
23 Progrmmable Output Impedance Not Support
24 Harmonic & Inter-harmonics Simulation Not Support
MEASUREMENT(Per Phase)
25 Voltage
(Per Phase)
Range AC 0~300VAC
DC 0~424VDC
Resclution 0.1V
Accuracy 0.2% of setting +0.4%F.S. (Notes: Vpeak: 0.6% of setting +1%F.S.)
26 Frequency
(Per Phase)
Range 15~1000Hz
Resclution 0.1Hz(15.0~99.9Hz) ,1Hz(100~1000Hz)
Accuracy 0.1% of setting
27 Current*
(r.m.s)
(Per Phase)
Range H 0.3A~46A
M 0.2A~20A
L 0.1A~5A
mA 0.02A~1.5A
Resclution 0.01A
Accuracy 0.4%+1.0%F.S.
28 Current*
(PEAK)
(Per Phase)
Range 0A~188A
Resclution 0.01A
Accuracy 0.4%+1.5%F.S.
29 Power
(Per Phase)
Range 0~5100W
Resclution 0.1W
Accuracy 0.4% of setting +0.3%F.S at PF>0.2, Voltage >5V
30

Power Apparent
(VA)
(Per Phase)

Range 0~5100VA
Resclution 0.1VA
Accuracy Voltage*Irms,Calculated value
31 Power Resistive
(VAR)
(Per Phase)
Range 0~5100VAR
Resclution 0.1VAR
Accuracy √[(VA)^2-(W)^2],Calculated value
32 Power Factor
(PF)
Range 0.00~1.00
Resclution 0.01
Accuracy W/VA, Calculated value
33 Harmonic Range Not Support
Extra Function
34 Slew Rate Range AC Voltage 0.001-1200.00V/mS and Disable
DC Voltage 0.001-1000.00V/mS and Disable
Frequency 0.001-1600.000HZ/ms and Disable
35 Remote Sense Range 5V(RMS), Max. Total power less than rated power
36 Cablibration Firmware-based cablibration through the digital interface or front panel display
Noted: Need Factory setting

37

Test Mode Not Support
38 Graphic Display 5.6'' Color touch LCD
39 Operation Key Feature Soft key,Numberic key,Rotary Knob,Support USB disk
40 Rack mount Handles YES
41 FAN Temperature Control
42 Protection Circuits OCP, OVP, OPP, OTP, RCP, PRI_UVP, PRI_OVP, PRI_OTP, PRI_OCP, USB_OCP
43 Interface Standard USB,RS485,RS232&LAN, Option GPIB interface
Environmental
44 Operating Temperature 0°C to 40°C
45 Storage Temperature -40°C to 85°C
46 Altitude 2000m
47 Relative Humidity 5-95%, non-condensing
48 Temperature Coefficient 100ppm/°C at Voltage, 300ppm/°C at Current, 100ppm/°C at FREQ
Mechanical
49 Dimensions(W*H*D) 560x945x700 mm
50 Unit Net Weight 157.0kg

*Note:The tolerance will change slightly in high frequency condition

Looking for ideal Power Source Power Supply Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Power Source Equipment are quality guaranteed. We are China Origin Factory of Power Supply Source. If you have any question, please feel free to contact us.

Product Categories : Three Phase AC Source System > 15000W Three Phase AC Source System

Product Images

  • High power triphase AC source lab test
  • High power triphase AC source lab test
  • High power triphase AC source lab test
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Emily Cui Ms. Emily Cui
What can I do for you?
Chat Now Contact Supplier