Home > Products > DC Source System > 75V DC Source System > DC power supply project with single unit

DC power supply project with single unit

Basic Info

Model No.: SYS75VDC12000W

Product Description

Product Introduction:

Find good solutions for your Bench Power Supply project. We can offer high power range up to 12kW in this DC Source System. The maximum voltage is 225V with current 60A if the single power supplies are connected in parallel.while in series connection, maximum current is 180A with voltage 75V. No need to program each Power Supply individually as there`s built-in master/slave control.



Application Area:

This series is applicable to multiple sectors such as electric, lighting and aviation sectors and it could be applied to enterprise's production test as well.


Product Features:

With accurate voltage and current measurement capability.
Coded Knob, multifunction keyboard.
Standard RS232/RS485/USB/LAN communication interfaces, GPIB is optional.
Remote sensing line voltage drop compensation.
Equips with LIST waveform editing function.
Use the Standard Commands for Programmable Instrumentation(SCPI) communication protocol.
● Have obtained CE certification.


Technical Specification:


ltem MODEL SYS75VDC12000W
INPUT
1 Voltage 190~265VAC
2 Frequency 47~63Hz
3 Phase 3 Phase,4Wire+Groud/Y Connect
4 Max.Current 75A
5 Input Power Max 15kW
6 Power Factor
at 220VAC Input ,Full Load
0.98 Min. Active PFC
7 Efficiency >88% Max @Full Load and Units=4kW Model
OUTNPUT (Parallel Mode)
8 Output Voltage 0~75V
9 Output Current 0~180A
10 Output Power 12kW Max
11 Load Regulation Voltage 120mV
12 Current 0.18A
13 Line Regulation Voltage 0.02%F.S.+30mV
14 Current 0.02%F.S.+15mA
15 Voltage Setting Range 0~75V
16 Resolution 0.1mV
17 Accuracy 0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc
18 Current Setting Range 0~180A
19 Resolution 10mA
20 Accuracy 0.1%+0.10%F.S
21 Ripple Voltage 80mVp-p/16mVrms
22 Current 90mA(Full Range),15mA(TYP Value)
MEASUREMENT (Parallel Mode)
23 Voltage Setting Range 0~75V
24 Resolution 0.1mV
25 Accuracy

0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc

26 Current Setting Range 0~180A
27 Resolution 10mA
28 Accuracy 0.1%+0.10%F.S
OUTNPUT (Series Mode)
29 Output Voltage 0~225V
30 Output Current 0~60A
31 Output Power 12kW Max
32 Load Regulation Voltage 120mV
33 Current 0.18A
34 Line Regulation Voltage 0.02%F.S.+30mV
35 Current 0.02%F.S.+15mA
36 Voltage Setting Range 0~225V
37 Resolution 10mV
38 Accuracy 0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc
39 Current Setting Range 0~60A
40 Resolution 0.1mA
41 Accuracy 0.1%+0.10%F.S
42 Ripple Voltage 60mVp-p/12mVrms
43 Current 120mA(Full Range),20mA(TYP Value)
MEASUREMENT (Series Mode)
44 Voltage Setting Range 0~225V
45 Resolution 10mV
46 Accuracy 0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc
47 Current Setting Range 0~60A
48 Resolution 0.1mA
49 Accuracy 0.1%+0.10%F.S
Extra Function
50 Remote Sense Range 5V(DC), Max. Total power less than rated power
51 Comm. Respondence. 50ms
52 Graphic Display VFD
53 Operation Key Feature Soft key,Numberic key,Rotary Knob
54 Rack mount Handles Yes
55 FAN Temperature Control
56 Protection Circuits OCP, OVP, OPP, OTP,FAN
57 Interface USB, RS485, RS232, LAN(Standard); GPIB(Option)
Remote Control Input/Output signal characteristics
58 Remote Input signal Not Support
59 Remote output signal Not Support
Environmental
60 Operating Temperature 0°C~40°C
61 Storage Temperature -20°C~70°C
62 Altitude 2000m
63 Relative Humidity 10%~90%, non-condensing
64 Temperature Coefficient 100ppm/°C at Voltage, 300ppm/°C at Current
Mechanical
65 Dimensions(W*H*D) 600.0*736.0*700.0 mm
66 Package Dimensions(W*H*D) 720.0*910.0*820.0 mm
67 Unit Net Weight 54kg+15kg*N(REF)
68 Accessories Weight 0.4kg
69 Shipping Weight 94kg+15kg*N(REF)
Regulatory Compliance
70 CE Mark Installation Overvltage Category II;Class II equipment;indoor use only.

*F.S. represents the maximum value of the output range.
*N stands for the number of installed power supply units,and N is greater than 1.



Looking for ideal 10 Volt Power Supply Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the 10v Power Supply are quality guaranteed. We are China Origin Factory of Bench Power Supply Project. If you have any question, please feel free to contact us.

Product Categories : DC Source System > 75V DC Source System

Product Images

  • DC power supply project with single unit
  • DC power supply project with single unit
  • DC power supply project with single unit
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Emily Cui Ms. Emily Cui
What can I do for you?
Chat Now Contact Supplier