Home > Products > DC Source System > 600V DC Source System > 600V lab power supply project design 24kW

600V lab power supply project design 24kW

Basic Info

Model No.: SYS600VDC24000W

Product Description

Product Introduction:

We design the 12U rack system by combining the single units to extend the power voltage current range. Buy Variable Dc Power Supply with APM. This SYS series is single-output Dc Power Supply, 800V/45A,24000W features high-programming resolution,multiple remote interfaces for test systems, Power Supply test equipment.



Application Area:

This series is applicable to multiple sectors such as electric, lighting and aviation sectors and it could be applied to enterprise's production test as well.


Product Features:

With accurate voltage and current measurement capability.
Coded Knob, multifunction keyboard.
Standard RS232/RS485/USB/LAN communication interfaces, GPIB is optional.
Remote sensing line voltage drop compensation.
Equips with LIST waveform editing function.
Use the Standard Commands for Programmable Instrumentation(SCPI) communication protocol.
● Have obtained CE certification.


Technical Specification:

ltem MODEL SYS600VDC24000W
INPUT
1 Voltage 190~265VAC
2 Frequency 47~63Hz
3 Phase 3 Phase,4Wire+Groud/Y Connect
4 Max.Current 150A
5 Input Power Max 28.5kW
6 Power Factor
at 220VAC Input ,Full Load
0.98 Min. Active PFC
7 Efficiency >88% Max @Full Load and Units=4kW Model
OUTNPUT (Parallel Mode)
8 Output Voltage 0~600V
9 Output Current 0~60A
10 Output Power 24kW Max
11 Load Regulation Voltage 480mV
12 Current 60mA
13 Line Regulation Voltage 0.02%F.S.+30mV
14 Current 0.02%F.S.+15mA
15 Voltage Setting Range 0~600V
16 Resolution 1mV
17 Accuracy 0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc
18 Current Setting Range 0~60A
19 Resolution 1mA
20 Accuracy 0.1%+0.10%F.S
21 Ripple Voltage 700mVp-p/80mVrms
22 Current 75mA(Full Range),30mA(TYP Value)
MEASUREMENT (Parallel Mode)
23 Voltage Setting Range 0~600V
24 Resolution 1mV
25 Accuracy

0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc

26 Current Setting Range 0~60A
27 Resolution 1mA
28 Accuracy 0.1%+0.10%F.S
Extra Function
29 Remote Sense Range 5V(DC), Max. Total power less than rated power
30 Comm. Respondence. 50ms
31 Graphic Display VFD
32 Operation Key Feature Soft key,Numberic key,Rotary Knob
33 Rack mount Handles Yes
34 FAN Temperature Control
35 Protection Circuits OCP, OVP, OPP, OTP,FAN
36 Interface USB, RS485, RS232, LAN(Standard); GPIB(Option)
Remote Control Input/Output signal characteristics
37 Remote Input signal Not Support
38 Remote output signal Not Support
Environmental
39 Operating Temperature 0°C~40°C
40 Storage Temperature -20°C~70°C
41 Altitude 2000m
42 Relative Humidity 10%~90%, non-condensing
43 Temperature Coefficient 100ppm/°C at Voltage, 300ppm/°C at Current
Mechanical
44 Dimensions(W*H*D) 600.0*1064.0*700.0 mm
45 Package Dimensions(W*H*D) 720.0*1240.0*820.0 mm
46 Unit Net Weight 100.0kg+15kg*N(REF)
47 Accessories Weight 0.4kg
48 Shipping Weight 160.0kg+15kg*N(REF)
Regulatory Compliance
49 CE Mark Installation Overvltage Category II;Class II equipment;indoor use only.

*F.S. represents the maximum value of the output range.
*N stands for the number of installed power supply units,and N is greater than 1.


Looking for ideal 600v Power Supply Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Laboratory Power Supply Design are quality guaranteed. We are China Origin Factory of Lab Power Supply Project. If you have any question, please feel free to contact us.

Product Categories : DC Source System > 600V DC Source System

Product Images

  • 600V lab power supply project design 24kW
  • 600V lab power supply project design 24kW
  • 600V lab power supply project design 24kW
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Emily Cui Ms. Emily Cui
What can I do for you?
Chat Now Contact Supplier