Home > Products > DC Source System > 40V DC Source System > Programmable power supply for Industrial variable volt

Programmable power supply for Industrial variable volt

Basic Info

Model No.: SYS40VDC40000W

Product Description

Product Introduction:

APM has the 20U Dc Source rack system to meet industrial Programmable Power Supply.It`s combined with max 10 units of 2U type single DC Power Supplies into this rack, creating"one" Power Supply to deliver max power 40kW, max current 1200A, 40A when connected in parallel or max voltage 400V, 120A when connected in series.The built-in master/slave control makes it just like one big programmable power supply to meet all kinds of test.



Application Area:

This series is applicable to multiple sectors such as electric, lighting and aviation sectors and it could be applied to enterprise's production test as well.


Product Features:

With accurate voltage and current measurement capability.
Coded Knob, multifunction keyboard.
Standard RS232/RS485/USB/LAN communication interfaces, GPIB is optional.
Remote sensing line voltage drop compensation.
Equips with LIST waveform editing function.
Use the Standard Commands for Programmable Instrumentation(SCPI) communication protocol.
● Have obtained CE certification.


Technical Specification:

ltem MODEL SYS40VDC40000W
INPUT
1 Voltage 190~265VAC
2 Frequency 47~63Hz
3 Phase 3 Phase,4Wire+Groud/Y Connect
4 Max.Current 250A
5 Input Power Max 47.5kW
6 Power Factor
at 220VAC Input ,Full Load
0.98 Min. Active PFC
7 Efficiency >88% Max @Full Load and Units=4kW Model
OUTNPUT (Parallel Mode)
8 Output Voltage 0~40V
9 Output Current 0~1200A
10 Output Power 40kW Max
11 Load Regulation Voltage 400mV
12 Current 1.2A
13 Line Regulation Voltage 0.02%F.S.+30mV
14 Current 0.02%F.S.+15mA
15 Voltage Setting Range 0~40V
16 Resolution 0.1mV
17 Accuracy 0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc
18 Current Setting Range 0~1200A
19 Resolution 0.1A
20 Accuracy 0.1%+0.10%F.S
21 Ripple Voltage 80mVp-p/12mVrms
22 Current 750mA(Full Range),100mA(TYP Value)
MEASUREMENT (Parallel Mode)
23 Voltage Setting Range 0~40V
24 Resolution 0.1mV
25 Accuracy

0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc

26 Current Setting Range 0~1200A
27 Resolution 0.1A
28 Accuracy 0.1%+0.10%F.S
OUTNPUT (Series Mode)
29 Output Voltage 0~400V
30 Output Current 0~120A
31 Output Power 40kW Max
32 Load Regulation Voltage 400mV
33 Current 1.2A
34 Line Regulation Voltage 0.02%F.S.+30mV
35 Current 0.02%F.S.+15mA
36 Voltage Setting Range 0~400V
37 Resolution 10mV
38 Accuracy 0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc
39 Current Setting Range 0~120A
40 Resolution 1mA
41 Accuracy 0.1%+0.10%F.S
42 Ripple Voltage 200mVp-p/30mVrms
43 Current 300mA(Full Range),40mA(TYP Value)
MEASUREMENT (Series Mode)
44 Voltage Setting Range 0~400V
45 Resolution 10mV
46 Accuracy 0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc
0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc
47 Current Setting Range 0~120A
48 Resolution 1mA
49 Accuracy 0.1%+0.10%F.S
Extra Function
50 Remote Sense Range 5V(DC), Max. Total power less than rated power
51 Comm. Respondence. 50ms
52 Graphic Display VFD
53 Operation Key Feature Soft key,Numberic key,Rotary Knob
54 Rack mount Handles Yes
55 FAN Temperature Control
56 Protection Circuits OCP, OVP, OPP, OTP,FAN
57 Interface USB, RS485, RS232, LAN(Standard); GPIB(Option)
Remote Control Input/Output signal characteristics
58 Remote Input signal Not Support
59 Remote output signal Not Support
Environmental
60 Operating Temperature 0°C~40°C
61 Storage Temperature -20°C~70°C
62 Altitude 2000m
63 Relative Humidity 10%~90%, non-condensing
64 Temperature Coefficient 100ppm/°C at Voltage, 300ppm/°C at Current
Mechanical
65 Dimensions(W*H*D) 600.0*1524.0*700.0 mm
66 Package Dimensions(W*H*D) 720.0*1700.0*820.0 mm
67 Unit Net Weight 120.0kg+15kg*N(REF)
68 Accessories Weight 0.4kg
69 Shipping Weight 200.0kg+15kg*N(REF)
Regulatory Compliance
70 CE Mark Installation Overvltage Category II;Class II equipment;indoor use only.

*F.S. represents the maximum value of the output range.
*N stands for the number of installed power supply units,and N is greater than 1.


Looking for ideal 12v Dc Variable Power Supply Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Industrial Programmable Power Supply are quality guaranteed. We are China Origin Factory of 10v Dc Power Supply. If you have any question, please feel free to contact us.

Product Categories : DC Source System > 40V DC Source System

Product Images

  • Programmable power supply for Industrial variable volt
  • Programmable power supply for Industrial variable volt
  • Programmable power supply for Industrial variable volt
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Emily Cui Ms. Emily Cui
What can I do for you?
Chat Now Contact Supplier